Viewing or updating the DHCP address using the serial
console cable
Procedure
1. Access the System Utilities menu.
2. Navigate through the menu options System Configuration > iLO 4 Configuration Utility > Network
> DNS/DHCP, and press Enter. The Network Autoconfiguration screen displays.
3. View or update the DHCP settings.
4. To save any changes, press the F10 key.
5. After saving all settings, iLO prompts for a reset in order for any new settings to be used. Reset the
system.
Finding the IP address through DHCP
Procedure
1. Access the System Utilities menu.
2. Navigate through the menu options System Configuration > iLO 4 Configuration Utility > Network
Options.
3. The Network Options screen displays the IP address.
34
Viewing or updating the DHCP address using the serial console cable