HP Vectra VL6 8 Installation Manual
Auto lanstreamer pci adapter
Hide thumbs
Also See for Vectra VL6 8:
- User manual (62 pages) ,
- Hardware manual (39 pages) ,
- Supplementary manual (29 pages)
Related Manuals for HP Vectra VL6 8
Summary of Contents for HP Vectra VL6 8
- Page 1 Auto LANStreamer PCI Adapter 04H8095 Installation Guide...
- Page 2 Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
- Page 3 C800-h C800-h Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot. 2 Insert the IBM LANStreamer TR drivers disk 2 (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.
- Page 4 1 Connecting to a Netware 3.12 Server Windows for Workgroups C:\WINDOWS IBM Auto LANStreamer PCI Adapter (use the driver on disk 3 of 5, Netware DOS requester Installation disk) 7 Highlight option 6 to continue with installation. 8 When prompted, insert the corresponding disks to complete file transfer and driver installation.
- Page 5 C800-h DC00-h Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot. 2 Insert the IBM LANStreamer TR drivers disk 2 (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.
- Page 6 10 Insert disk 1 of 5 (Auto LANStreamer PCI Driver Diskette), set the path to “A:\” and click “OK.” (If you have an HP preloaded HDD, set the path to “C:\MASTERS\LAN\LNSTRM\DISK2\”) 11 At the “Copying Files” window, click on “OK.”...
- Page 7 C800h DC00-h Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot. 2 Insert the IBM LANStreamer TR drivers disk 2 (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.
- Page 8 2 Connecting to a Netware 4.11 Server Windows for Workgroups IBM Auto LANStreamer PCI Adapter (use the driver on disk 3 of 5, Netware DOS requester Installation disk) 7 Highlight option 6 to continue with installation. 8 When prompted, insert the corresponding disks to complete file transfer and driver installation.
- Page 9 C800-h DC00-h Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot. 2 Insert the IBM LANStreamer TR drivers disk (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.
- Page 10 Windows 95 SR2 10 Insert disk 1of 5 (Auto LANStreamer PCI Driver Diskette), set the path to “A:\” and click “OK.” (If you have an HP preloaded HDD, set the path to “C:\MASTERS\LANDRV\LNSTRM\DISK2\”) 11 At the “Copying Files” window, click on “OK.”...
- Page 11 C800h DC00-h Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot. 2 Insert the IBM LANStreamer TR drivers disk (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.
- Page 12 9 Insert disk 1 of 5 (Auto LANStreamer PCI Driver Diskette), set the path to “A:\” and hit enter. (If you have an HP preloaded HDD, set the path to D:\MASTERS\LAN\LNSTRM\DISK2\”) 10 Select “IBM Streamer Family Adapter” and click on “OK.”...
- Page 13 10(11) Level Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot. 2 Insert the IBM LANStreamer TR drivers disk 2 of 5 (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.
- Page 14 Option Diskette”, click “OK.” 11 Insert Disk 1 of 5 of IBM Auto LANStreamer drivers disks and set path to “A:\” (If you have an HP pre-loaded HDD, set the path statement to “C:MASTERS\LANDRV\LNSTRM\DISK1\”). 12 Click “OK” to continue installation.
- Page 15 3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 “C:\MASTERS\LANDRV\LNSTRM\DISK4\WIN95\”) 25 Click on “Yes” button to finish the setup installation and restart your computer.
- Page 16 3 Connecting to a Windows NT Server 3.51 Windows 95 SR2...
- Page 17 10(11) Level Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot. 2 Insert the IBM LANStreamer TR drivers disk 2 of 5 (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.
- Page 18 9 In the “Windows NT Setup” enter the path to your NT files, and click on the “Continue” button. (If you have an HP preloaded HDD, set path to “C:\I386”) 10 Click on the “Do Not Detect” button from the “Network Adapter Card Detection”...
- Page 19 3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 box.
- Page 20 3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51...
- Page 21 10(11) Level Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot. 2 Insert the IBM LANStreamer TR drivers disk 2 of 5 (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.
- Page 22 18 In the “Windows NT Setup” enter the path to your NT files, and click on the “Continue” button. (If you have an HP preloaded HDD, set path to “C:\I386”) 19 Click on the “OK” button in the “IBM Auto LANStreamer PCI Adapter”...
- Page 23 3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 26 To complete the installation, remove the floppy disk, and click on “Yes” to restart your computer.
- Page 24 10(11) Level Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot. 2 Insert the IBM LANStreamer TR drivers disk 2 of 5 (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.
- Page 25 18 In the “Windows NT Setup” enter the path to your NT files, and click on the “Continue” button. (If you have an HP preloaded HDD, set path to “C:\I386”) 19 Click on the “OK” button in the “IBM Auto LANStreamer PCI Adapter”...
- Page 26 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 (If you do not have the required information, contact your network administrator) 25 Verify that “Networking has been installed on this computer” and click on “Finish.” 26 To complete the installation, remove the floppy disk, and click on “Yes” to restart your computer.
- Page 27 10(11) Level Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot. 2 Insert the IBM LANStreamer TR drivers disk (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.
- Page 28 12 Set the path to “A:\NT” in the “Insert Disk” dialog box, and then insert the disk 4 of 5 , Auto LANStreamer PCI drivers disk. (If you have an HP preloaded HDD, set path to “C:Masters\LanDrv\LNSTRM\DISK4\NT\”) 13 Click “OK” at the “Install Driver” dialog box.
- Page 29 C800h DC00h Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot. 2 Insert the IBM LANStreamer TR drivers disk (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.
- Page 30 4 Connecting to a Windows NT Server 4.0 Windows for Workgroups D:\MASTERS\LAN\LNSTRM\DISK2\”) 10 Select “IBM Streamer Family Adapter” and click on “OK.” 11 Verify that “IBM Streamer Family Family Adapter [NDIS2]” is listed under “Network Drivers” and click on “Close.” 12 Click on “OK”...
- Page 31 10(11) Level Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot. 2 Insert the IBM LANStreamer TR drivers disk (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.
- Page 32 Windows 95 SR2 Option Diskette”, click “OK.”Insert Disk 1 of 5 of IBM Auto LANStreamer drivers disks and set path to “A:\” (If you have an HP pre-loaded HDD, set the path statement to “C:\ MASTERS\LANDRV\LNSTRM\DISK1\”). 11 Click “OK” to continue installation.
- Page 33 4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 computer.
- Page 34 4 Connecting to a Windows NT Server 4.0 Windows 95 SR2...
- Page 36 Version Number Lans PCI Rev.1...