Ilo Restful Api Support For Uefi; Re-Entering The Server Serial Number And Product Id - HP Edgeline EL1000 User Manual

Hide thumbs Also See for Edgeline EL1000:
Table of Contents

Advertisement

For more information on the Embedded Diagnostics option, see the UEFI System Utilities user guide for
your system on the Hewlett Packard Enterprise website.

iLO RESTful API support for UEFI

The ProLiant Gen9 servers include support for a UEFI-compliant System BIOS, along with UEFI System
Utilities and Embedded UEFI Shell preboot environments. ProLiant Gen9 servers also support configuring
the UEFI BIOS settings using the iLO RESTful API, a management interface that server management
tools can use to perform configuration, inventory, and monitoring of a ProLiant server. The iLO RESTful
API uses basic HTTPS operations (GET, PUT, POST, DELETE, and PATCH) to submit or return JSON-
formatted data with iLO web server.
For more information about the iLO RESTful API and the RESTful Interface Tool, see the Hewlett
Packard Enterprise website.

Re-entering the server serial number and product ID

About this task
After you replace the system board, you must re-enter the system serial number and the product ID:
Procedure
1. During the system startup sequence, press the F9 key to access UEFI System Utilities.
2. Select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options >
Advanced System ROM Options > Serial Number, and then press the Enter key.
3. Enter the serial number and press the Enter key.
The following message appears:
The serial number should only be modified by qualified service personnel.
This value should always match the serial number located on the chassis.
4. To clear the warning, press the Enter key.
5. Enter the serial number and press the Enter key.
6. Select Product ID.
The following warning appears:
Warning: The Product ID should ONLY be modified by qualified service
personnel. This value should always match the Product ID located on the
chassis.
7. Enter the product ID and press the Enter key.
8. To confirm exiting System Utilities, press the F10 key.
The system automatically reboots.
42
iLO RESTful API support for UEFI

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents