Configuration
Accessing the System Utilities menu
About this task
To complete these steps, you need the HPE USB-to-serial cable (HPE part number 871947-B21).
Table 1: Settings for connecting USB cable to serial port
Specifications
Baud rate
Data bits
Parity
Stop bit
Procedure
1. Power down the cartridge.
2. Connect the USB-to-serial cable to the system. The USB end is connected to a system USB port.
3. Attach the serial end of the cable to a serial port using a null modem cable. The other serial port may
be another USB-to-serial adapter on a different machine.
4. Power on the cartridge. The serial console output screen displays.
5. Press the ESC + 9 keys. The System Utilities menu displays.
Value
115200
8
None
1 (8 N1)
Configuration
33