Table of Contents
Advertisement
/usr/local/topspin/sbin/rescan-scsi-bus.sh
Host adapter 0 (aic79xx) found.
Host adapter 1 (aic79xx) found.
Host adapter 2 (srp) found.
Scanning for device 0 0 0 0 ...
OLD: Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE
Type:
Direct-Access
Scanning for device 0 0 6 0 ....
OLD: Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: SUPER
Type:
Processor
Scanning for device 0 0 6 9 ...
[root@enclus3 root]# /etc/modules.conf
# BEGIN TOPSPIN ##
options scsi_mod max_scsi_luns=255
...
[root@enclus3 etc]# cd initrd
[root@enclus3 initrd]# mkinitrd -v-f /boot/initrd-2.4.21-9.0.1.ELsmp.img
2.4.21-9.0.1.ELsmp
[root@enclus3 initrd]# lilo -c
SRP Sample Configuration
Follow
Step 3
-
Step 6
Example
Model: ST336607LC
Model: GEM318
3.
Edit the /etc/modules.conf file.
4.
Add the following line to the directory:
5.
Rebuild the Initial RAM disk (initrd)
6.
(Optional) If your Initial RAM disk (initrd) uses LILO as the bootloader, you must include the
following step. This is not necessary if your bootloader is grub.
The following sample configuration covers a complex storage solution.
Sample SRP/Storage Topology
The following sample includes the following elements:
•
EMC CX200 storage
•
Topspin 360 InfiniBand chassis with a Fibre Channel gateway
•
REL3 host with a single InfiniBand HCA installed
The example uses Logical Volume Manager (LVM) based storage subsystem configuration.
Viewing the Storage Configuration
In this example, the CX200 configuration is displayed through the EMC Navisphere Management Suite.
to correct the LUN discovery.
Rev: 0006
ANSI SCSI revision: 03
Rev: 0
ANSI SCSI revision: 02
45
Advertisement
Table of Contents
