Page of 28

HP 04H8095 Installation Manual

Auto lanstreamer pci adapter.
Hide thumbs
Auto LANstreamer PCI Adapter
04H8095
Installation Guide

Advertising

   Related Manuals for HP 04H8095

   Summary of Contents for HP 04H8095

  • Page 1

    Auto LANstreamer PCI Adapter 04H8095 Installation Guide...

  • Page 2

    Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

  • Page 3

    • I/O Address FCC0-h Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot. 2 Insert the IBM LANStreamer TR drivers disk 1 of 6 (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.

  • Page 4

    1 Connecting to a Netware 3.12 Server Windows for Workgroups • IBM Auto LANStreamer PCI Adapter (use the driver on disk 3 of 5, Net- ware DOS requester Installation disk) 7 Highlight option 6 to continue with installation. 8 When prompted, insert the corresponding disks to complete file transfer and driver installation.

  • Page 5

    Option Diskette”, click on “OK.” 10 Insert disk 2 of 6 (Auto LANStreamer PCI Driver Diskette), set the path to “A:\” and click “OK.” (If you have an HP preloaded HDD, set the path to “C:\LANDRV\LNSTRM\DISK2\”) 11 At the “Copying Files” window, click on “OK.”...

  • Page 6

    Option Diskette”, click on “OK.” 18 Insert disk 4 of 6 (Auto LANStreamer PCI Driver Diskette), set the path to “A:\Win95\” and click “OK.” (If you have an HP preloaded HDD, set the path to “C:\LANDRV\LNSTRM\DISK4\WIN95\”) 19 Click on “Yes” to restart your computer and finish the installation.

  • Page 7

    • I/O Address FCC0-h Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot. 2 Insert the IBM LANStreamer TR drivers disk 1 of 6 (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.

  • Page 8

    2 Connecting to a Netware 4.11 Server Windows for Workgroups • IBM Auto LANStreamer PCI Adapter (use the driver on disk 3 of 5, Net- ware DOS requester Installation disk) 7 Highlight option 6 to continue with installation. 8 When prompted, insert the corresponding disks to complete file transfer and driver installation.

  • Page 9

    Option Diskette”, click on “OK.” 10 Insert disk 2 of 6 (Auto LANStreamer PCI Driver Diskette), set the path to “A:\” and click “OK.” (If you have an HP preloaded HDD, set the path to “C:\LANDRV\LNSTRM\DISK2\”) 11 At the “Copying Files” window, click on “OK.”...

  • Page 10

    Option Diskette”, click on “OK.” 18 Insert disk 4 of 6 (Auto LANStreamer PCI Driver Diskette), set the path to “A:\Win95\” and click “OK.” (If you have an HP preloaded HDD, set the path to “C:\LANDRV\LNSTRM\DISK4\Win95\”) 19 Click on “Yes” to restart your computer and finish the installation.

  • Page 11

    8 With “Unlisted or Updated Network Adapter”, click on “OK.” 9 Insert disk 2 of 6 (Auto LANStreamer PCI Driver Diskette), set the path to “A:\” and hit enter. (If you have an HP preloaded HDD, set the path to D:\LANDRV\LNSTRM\DISK2\”)

  • Page 12

    3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 10 Select “IBM Streamer Family Adapter” and click on “OK.” 11 Verify that “IBM Streamer Family Family Adapter [NDIS2]” is listed under “Network Drivers” and clcik on “Close.” 12 Click on “OK” in the “Network Setup” window. 13 Specify your User Name, Workgroup Name, Computer Name, and click on “OK.”...

  • Page 13

    7 Click the “Next” button to begin hardware wizard. 8 Click on “Other Locations” in the “Update Device Driver Location” dialog box, and set path to “A:\WIN95” then click “OK” (If you have an HP pre- loaded HDD, set the path statement to “C:\LANDRV\LNSTRM\DISK4\WIN95\”).

  • Page 14

    21 When prompted for your Windows 95 files, click on “OK.” 22 Set the path to your Windows 95 files and click “OK” to the “Insert Disk” dialog box. (If you have an HP pre-loaded HDD, set the path statement to “C:\MASTERS\WIN95\SYSTEM\CABS\”).

  • Page 15

    FC00h • Interrupt Request Level Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot. 2 Insert the IBM LANStreamer TR drivers disk 1 of 6 (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.

  • Page 16

    “Continue“. 12 Set the path to “A:\NT” in the “Insert Disk” dialog box, and then insert the disk 4 of 6 , Auto LANStreamer PCI drivers disk. (If you have an HP preloaded HDD, set path to “C:\LANDRV\LNSTRM\DISK4\NT\”) 13 Click “OK”...

  • Page 17

    10 Click on “Select from List”, then click “Have Disk.” 11 Set the path to “A:\NT” in the “Insert Disk” dialog box, and then insert the disk 4 of 6 , Auto LANStreamer PCI drivers disk. (If you have an HP preloaded HDD, set path to “C:\LANDRV\LNSTRM\DISK4\NT\”)

  • Page 18

    17 Insert the Windows NT Workstaion CD. 18 In the “Windows NT Setup” enter the path to your NT files, and click on the “Continue” button. (If you have an HP preloaded HDD, set path to “C:\I386”) 19 Click on the “OK” button in the “IBM Auto LANStreamer PCI Adapter”...

  • Page 19

    FC00h • Interrupt Request Level Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot. 2 Insert the IBM LANStreamer TR drivers disk 1 of 6 (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.

  • Page 20

    Windows NT Workstation Version 4.0 11 Set the path to “A:\NT” in the “Insert Disk” dialog box, and then insert the disk 4 of 6 , Auto LANStreamer PCI drivers disk. (If you have an HP preloaded HDD, set path to “C:\LANDRV\LNSTRM\DISK4\NT\”) 12 Select “IBM Streamer Family Adapters”...

  • Page 21

    FC00h • Interrupt Request Level Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot. 2 Insert the IBM LANStreamer TR drivers disk 1 of 6 (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.

  • Page 22

    “Continue“. 12 Set the path to “A:\NT” in the “Insert Disk” dialog box, and then insert the disk 4 of 6 , Auto LANStreamer PCI drivers disk. (If you have an HP preloaded HDD, set path to “C:\LANDRV\LNSTRM\DISK4\NT\”) 13 Click “OK”...

  • Page 23

    8 With “Unlisted or Updated Network Adapter”, click on “OK.” 9 Insert disk 2 of 6 (Auto LANStreamer PCI Driver Diskette), set the path to “A:\” and hit enter. (If you have an HP preloaded HDD, set the path to D:\LANDRV\LNSTRM\DISK2\”) 10 Select “IBM Streamer Family Adapter”...

  • Page 24

    4 Connecting to a Windows NT Server 4.0 Windows for Workgroups 12 Click on “OK” in the “Network Setup” window. 13 Specify your User Name, Workgroup Name, Computer Name, and click on “OK.” 14 After files copy, click on “OK” to approve the modification of your CONFIG.SYS, AUTOEXEC.BAT, AND SYSTEM.INI files.

  • Page 25

    7 Click the “Next” button to begin hardware wizard. 8 Click on “Other Locations” in the “Update Device Driver Location” dialog box, and set path to “A:\WIN95” then click “OK” (If you have an HP pre- loaded HDD, set the path statement to “C:\LANDRV\LNSTRM\DISK4\WIN95\”).

  • Page 26

    21 When prompted for your Windows 95 files, click on “OK.” 22 Set the path to your Windows 95 files and click “OK” to the “Insert Disk” dialog box. (If you have an HP pre-loaded HDD, set the path statement to “C:\MASTERS\WIN95\SYSTEM\CABS\”).

  • Page 28

    Version Number Lans PCI Rev.1...

Comments to this Manuals

Symbols: 0
Latest comments: