Download Print this page

HP Edgeline EL1000 User Manual: Dismounting The System From A Rack Mount; Dismounting The System From An Etsi Rack Mount; Dismounting The System From An Enterprise Rack Mount; Remove The Access Panel

Hide thumbs

Advertisement

Procedure
1. Remove the four T-15 Torx screws securing the wall mounting plate to the bottom of the system.
2. Disconnect all cables.

Dismounting the system from a rack mount

Procedure
1. Loosen the 2 captive screws on the front of rack mount shelf.
2. Slide the EL1000 system and shelf out from the rack mounts to the front.
3. Unplug the power cable and disconnect all cables from the system.
4. Remove the system from the shelf assembly by lifting vertically.

Dismounting the system from an ETSI rack mount

Procedure
1. Loosen the 2 captive screws on the front of rack mount shelf.
2. Slide the EL1000 system and shelf out from the rack mounts to the front.
3. Unplug the power cable and disconnect all cables from the system.
4. Remove the system from the shelf assembly by lifting vertically.

Dismounting the system from an Enterprise rack mount

Procedure
1. Slide the system out of the rack.
2. Unplug the power cable and disconnect all cables from the system.
3. Remove the retention bracket from the Enterprise rack mount.
4. Lift and remove the system from the rack mount.

Remove the access panel

Procedure
Using a Torx driver, remove the two T10 Torx screws securing the access panel to the system.
Dismounting the system from a rack mount
19

Advertisement

   Related Manuals for HP Edgeline EL1000

Comments to this Manuals

Symbols: 0
Latest comments: