Introduction; Overview; Utp Cat5 Cable - HP NC375T User Manual

Introduction

Overview

The HP NC375T PCI Express Quad Port Gigabit Server Adapter is a high-performance, low-profile,
Quad-Port PCI Express Ethernet adapter. The NC375T adapter, which ships with a standard-height
chassis bracket and an additional low-profile chassis bracket, has a fully integrated controller capable of
auto-negotiating a link at 10, 100, or 1000 Mbps on each port or a total aggregate throughput of 4
Gbps. The adapter is a supported option for selected HP ProLiant G6 and later servers.
For the latest functionality, features, and operating system support for this adapter, see the HP website
(http://h18004.www1.hp.com/products/servers/networking/index-nic.html).

UTP CAT5 cable

The NC375T adapter can use existing UTP CAT5 (or better) cable to deliver Gigabit Ethernet over
copper, according to the IEEE 802.3ab specifications. For new installations, CAT5e (enhanced CAT5)
cable is recommended.
For troubleshooting and other information about cabling, see UTP Cable Specifications (on page 11).
Introduction 6