Download Print this page

HP Edgeline EL1000 User Manual: Hardware Options Installation; Installing The Wall Mounting Option Kit; Installing The Rack Mounting Option Kit

Hide thumbs

Advertisement

Hardware options installation

Installing the wall mounting option kit
Procedure
1. Using the wall mount bracket, mark the locations for the wall mount screws.
2. Install the wall mount anchors and screws in the marked locations.
3. Align the wall mount bracket to the system.
4. Using a Torx driver, insert and tighten four T15 Torx screws to secure the bracket to the system.
5. Place the holes in the wall mount bracket over the wall mounting screws and slide to lock into place.
Installing the rack mounting option kit
Procedure
1. Align the rack mount bracket to the system.
2. Using a Torx driver, insert and tighten four T-10 Torx screws to secure the bracket to the system.
24
Hardware options installation

Advertisement

   Related Manuals for HP Edgeline EL1000

Comments to this Manuals

Symbols: 0
Latest comments: