Download Print this page

Advertisement

5.
Attach the (earthed) cable to the ground screw and washer and tighten to 13 lb-in of torque. The
ground cable must be connected before connecting the -48V wire and return wire.
6.
Insert the -48V wire into the left side of the connector and tighten the screw to 10 lb-in of torque.
7.
Insert the return wire into the right side of the connector and tighten the screw to 10 lb-in of torque.
Operations
15

Advertisement

   Related Manuals for HP Edgeline EL1000

Comments to this Manuals

Symbols: 0
Latest comments: