Operations
This chapter describes the hardware operations carried out prior to and after installing or removing a
hardware option, or performing a server maintenance or troubleshooting procedure.
Before performing these hardware operations, review and observe the server warnings and cautions.
Install an AC power supply
Procedure
1. Align the power supply to the system.
2. Insert the power supply until it locks in place.
3. Connect the power cord and tie wrap the cable.
Install the DC power supply
Procedure
1.
Remove the ring tongue from the top of the power supply.
2.
Crimp the ring tongue to the ground cable from the -48V power source.
Operations
13