Download Print this page

HP Edgeline EL1000 User Manual: Power Up The System; Mount The System; Dismount The System; Dismounting The System From A Wall Mount

Hide thumbs

Advertisement

Procedure
Use one of the following methods to power down the system:
Press and release the Power On/Standby button of the cartridges installed in the system.
This method initiates a controlled shutdown of applications and the OS before the system enters
standby mode.
Press and hold the Power On/Standby button of the cartridges installed in the system for more than
4 seconds to force the system to power down.
This method forces the system to power down without properly exiting applications and the OS. If
an application stops responding, you can use this method to force a shutdown.
Verify the system is in standby mode and the system power LED is off.

Power up the system

About this task
If the system is connected to a power source, it powers up automatically by default. Generally, it has to be
powered up only after a manual shutdown. However, using iLO, cartridges can be individually configured
to not power up automatically.
Procedure
Use one of the following methods to power up the system:
Press the Power On/Standby button of the cartridge installed in the system.
Remotely power up the system through iLO.
Mount the system
The following kits are available to mount your system:
Wall mounting kit
Rack mounting kit
ETSI rack mounting kit
Enterprise rack mounting kit
Dismount the system
Dismount the system, based on the mount installed:
Dismounting the system from a wall mount
Dismounting the system from a rack mount
Dismounting the system from an ETSI rack mount
Dismounting the system from an Enterprise rack mount
Dismounting the system from a wall mount
About this task
To dismount the system from a wall mount, slide the EL1000 system off the wall-mounting screws.
It is not necessary to remove the wall mounting plate from the EL1000 system. Hewlett Packard
Enterprise recommends having a cart to place the system upon, which allows you to service the system
without removing the wall mounting plate or cables.
Should you need to service the system in another location, perform the following steps.
18
Power up the system

Advertisement

   Related Manuals for HP Edgeline EL1000

Comments to this Manuals

Symbols: 0
Latest comments: