Pci-x 2-port 2 gigabit fibre channel and 2-port gigabit ethernet combination card, for fcd driver versions b.11.11.04 and b11.23.02 and for igelan driver versions b.11.11.17 and b.11.23.05 (18 pages)
HP NC150T PCI 4-port Gigabit Combo Switch Adapter User Guide June 2007 (Third Edition) Part Number 367256-00C...
Page 2
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Use this guide for installing the HP ProLiant NC 150T PCI 4-port Gigabit Combo Switch Adapter. WARNING: To reduce the risk of personal injury from electric shock and hazardous energy levels, only authorized service technicians should attempt to repair this equipment.
About This Guide Where to Go for Additional Help HP updates networking software frequently to include new functionality and features. Complete the following steps to get the latest drivers, firmware, and documentation. 1. Go to the HP website (http://www.hp.com). 2. Click Support and Troubleshooting Information from the left menu bar.
Adapter Overview The HP NC150T PCI 4-port Gigabit Combo Switch Adapter is a 32-bit/66MHz, PCI, Ethernet adapter and a 4-port Gigabit Layer 2 Unmanaged Ethernet Switch. This device provides an on-board connection between the Ethernet controller and the Gigabit switch.
The adapter is sending or receiving network data at 10 or 100 Mb/s. 1000 Mb link to the network is established. No 1000 Mb link to network is established. The adapter is sending or receiving network data at 1000 Mb/s. HP NC150T PCI 4-port Gigabit Combo Switch Adapter User Guide...
This server adapter is intended for use with UL Listed ITE equipment having instructions on adding and removing components such as PCI and PCI-X devices. NOTE: Before removing the cover of the server, refer to the HP documentation for the proper methods for installing a PCI card and avoiding electric shock hazards.
Installing the Adapter Installing the Adapter in a Server Refer to the HP ProLiant server documentation for additional information on how to safely install a PCI card in the server. Figure 2-1: Installing the adapter in a server CAUTION: If the server is not PCI Hot Plug compliant, power it down and unplug the power cord from the power outlet before removing the server cover.
To secure the cable, plug the cable connector into the RJ-45 port. Ensure that the tab on the plug clicks into position, indicating that it is properly seated. For more information, refer to “UTP Cable Specifications” in Appendix C. HP NC150T PCI 4-port Gigabit Combo Switch Adapter User Guide Installing the Adapter...
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. HP NC150T PCI 4-port Gigabit Combo Switch Adapter User Guide Regulatory Compliance Notices...
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. HP NC150T PCI 4-port Gigabit Combo Switch Adapter User Guide...
Use conductive field service tools. Use a portable field service kit with a folding static-dissipating work mat. If you do not have any of the suggested equipment for proper grounding, have an HP authorized reseller install the part. NOTE: For more information on static electricity or assistance with product installation, contact your HP authorized reseller.
For Gigabit over copper installations, Category 5 UTP or better 1000BASE-T cable must comply with the IEEE 802.3ab 1000BASE-T standard. For new installations, Category 5e (enhanced Category 5) or better cable is recommended. HP NC150T PCI 4-port Gigabit Combo Switch Adapter User Guide...