Table of Contents
Advertisement
2
Installing the HBA
This chapter describes the procedure for installing the Q2300 HBA, including:
• Installation
• Installing the
Refer to your host documentation for installing the HBA.
WARNING!
risk of personal injury from hot surfaces, allow the internal server or workstation components to cool
before touching.
WARNING!
properly grounded before beginning this procedure as described in
safety" on page 33
Installation prerequisites
Before you begin, make sure you have the following:
•
A screwdriver (Phillips #1).
•
An optical multimode cable with an LC-style duplex connector.
•
Each HBA has a unique serial number that is located on the bottom of the adapter. Check the
HBA and record its serial number, in the unlikely event that the NVRAM is corrupted.
prerequisites, page 13
HBA, page 16
Disconnect the host from the power source before installing the HBA. To reduce the
Electrostatic discharge (ESD) can damage electronic components. Be sure you are
Q2300 PCI-X host bus adapter for Itanium Linux systems installation guide
"Regulatory compliance and
13
Advertisement
Table of Contents
