Operation During A Call - NTT docomo F-05J arrows Be Instruction Manual

◆ Receiving a video call
<Example> When a call is received in sleep mode
1
A call is received
The incoming call screen (full-screen) appears.
Press P/volume key to stop ringtone or vibration.
･
･
When receiving a call, "HD" is displayed at the top of the
screen.
2
→[ACCEPT VIDEO]
Accepting with voice call :
Rejecting a call : →[REJECT]
Rejecting a call and sending SMS :
SMS]→Select a message
Accepting with camera OFF :
Recording phone memo :
3
When a call is ended, [END CALL]
✔INFORMATION
･
When receiving a call while the Home screen is displayed or
application is activated, the incoming call screen is displayed
at the top of the screen. After you accept and end call, the
previous screen is displayed. Tap a caller's name or phone
number on the incoming call screen, the incoming call screen
(full-screen).
･
When you could not answer a call, notification icon (→P50)
appears on the status bar. Open the Notification panel (→
P52) to check missed calls, dial or send SMS.
･
Incoming calls are answered when the terminal is simply held
up to the ear.
To use this function, set "Suguden setting" (→P74) to ON.
→[Accept voice]
→[Reject call with
→[Camera OFF response]
→[Phone memo]

Operation during a call

The following operations are possible in the screen during a
call.
･
You can adjust call volume with the volume key while
dialing/during a call.
a
b
c
d
e
Voice call screen
a Name or phone number
b Status of Voice clear/Voice adjusting/Voice slowing
Since Voice adjusting also activates while using Voice clear,
the sound quality will be adjusted to more suitable than
Voice clear. It recognizes caller's action or the ambient
condition and "Walking", "Run", "Quiet", "Crowds" or
"Noisy" is displayed.
c End call
d Show/hide the dialpad for dial input
Send touch-tone signals (DTMF tones).
･
To input dialing number during a video call, tap
[Dialpad].
70
f
g
k
l
h
i m
j
c
Video call screen
g
f
e
j
→
Calling