Shooting Video - NTT docomo F-05J arrows Be Instruction Manual

■ HDR mode
Shoot 2 images in different exposure time (long exposure and
short exposure) and compose a still image that white out or
crushed blacks is reduced.
･
The real-time HDR is equipped with the terminal, so you can
check the status of composited HDR on the shooting screen
during shooting.
■ SelfTimer
Set to shoot a picture 2 seconds (
seconds ( ) after the shutter is pressed.
■ Display grid
Set to display auxiliary lines (grid) on the shooting screen as
an assistant for photo composition.
■ Others
Location : Set to add location information to shot images.
When location information is set to be added, icon of
obtaining location information (not obtained) appears, then
for completion of obtaining appears on the shooting
screen.
Save : Select data saving location (Terminal/SD card).
･
If the selected saving destination is low on memory, a
message appears and switch saving destination temporarily
(except during continuous shooting).
Touch shutter : Set to shoot with auto focus lock sound and
shutter sound by tapping an object when the object is focused
on.
･
In continuous mode, only one image is shot.
Exposure/WB : Set whether to display the icons for exposure
correction ( )/white balance adjustment (
screen.
), 3 seconds ( ), or 5
for
) on the shooting

◆ Shooting video

1
From the Home screen, [Camera]
2
Flick the screen left
A video shooting screen appears.
3
Display an object on the shooting screen→
(Start)
Shooting start sound is heard and a shooting is started.
･
You can also start shooting by pressing the lower part
of the volume key.
･
When shooting starts, elapsed time appears on the
shooting screen.
4
(Stop)
Shooting end sound is heard and a shooting stops.
･
You can also stop shooting by pressing the lower part
of the volume key.
･
Recording stops when saving location become low on
memory or when file size of recorded data reaches the
limit (approx. 4 GB). Also, recording stops when a call is
received while recording.
107
Applications