NTT docomo F-05J arrows Be Instruction Manual page 136

◆ Screen timeout
❖
Sleep
Set time until the screen turns off.
1
From the Home screen,
[Display/Sound/Apps]→[Display & Wallpaper]
→[Screen timeout]
2
[Sleep]→Select time
❖
Keep lit when held
Set whether to keep the screen backlight on while the terminal
is in motion, held in hand.
1
From the Home screen,
[Display/Sound/Apps]→[Display & Wallpaper]
→[Screen timeout]
2
Mark/Unmark [Keep lit when held]
◆ Screen saver
Set screen saver which is displayed when the terminal goes
into the sleep mode while charging.
1
From the Home screen,
[Display/Sound/Apps]→[Display & Wallpaper]
→[Screen saver]
2
Tap the button in the upper right of the screen
to set [Screen saver] to ON
→[Settings]→
→[Settings]→
→[Settings]→
134
3
Select an application→ →Set each item
･
Tap [MENU]→[Start now] to activate Daydream.
◆ Shake to unrotate
By shaking the terminal twice, you can put the screen back to
the direction before it rotates automatically by changing your
position holding the terminal.
･
Set [Auto-rotate screen] of [Display & Wallpaper] to [ON] in
advance.→P133
1
From the Home screen,
[Display/Sound/Apps]→[Display & Wallpaper]
2
Mark [Shake to unrotate]
3
Shake the terminal twice immediately after the
screen direction is changed
The orientation of the screen is restored,
the status bar.
･
When is displayed, the screen orientation is locked.
When you rotate your terminal to the original
orientation, disappears in about 3 seconds and the
orientation lock is canceled.
✔INFORMATION
･
The screen view may not be changed depending on the
strength, speed or angle of shaking the terminal.
→[Settings]→
appears on
Settings