Nfc Communication - NTT docomo F-05J arrows Be Instruction Manual

Time : Set whether to synchronize time with a Time-
compatible device.
･
Regardless of the setting, time on the terminal is
synchronized with paired Time-compatible device.
When the setting is on, time on a Time-compatible
device is synchronized with the terminal even if the time
on the terminal changes after pairing is complete.
✔INFORMATION
･
Find Me Ringtone in Bluetooth Low Energy setting sounds
regardless of the Manner mode and volume settings.

NFC communication

NFC is an abbreviation for Near Field Communication and a
short range wireless communication method of international
standard defined by ISO (International Organization for
Standardization). You can use a contactless IC card function,
Reader/Writer function, P2P function, etc.
You can send/receive data to/from another NFC compatible
device using NFC function.
･
For notes when holding over the other device, refer to
"Notes when holding over the other device".→P95
◆ Android Beam
Transfer data between the terminal and a Reader/Writer, P2P
equipped terminal.
･
To use Android Beam, set to allow data transfer beforehand.
･
When "Lock NFC/Osaifu-Keitai" is activated, Android Beam
cannot be used.
･
Android Beam cannot be used on some applications.
Available data varies by applications.
･
Data transfer is not guaranteed for all Reader/Writer, P2P
equipped terminals.
1
From the Home screen,
[Wireless & networks]→[NFC/Osaifu-Keitai
Settings]
･
When a password setting screen appears, set a
password.
･
If [Lock NFC/Osaifu-Keitai] is marked, unmark the
checkbox.
2
Mark [Reader/Writer, P2P]
3
[Android Beam]→Tap the button at the upper
right of the screen to turn [Android Beam] ON
167
→[Settings]→
Data communication