NTT docomo F-05J arrows Be Instruction Manual page 77

*2 Not supported to VoLTE.
*3 Making a call operation is available while the Home
screen or the lock screen is displayed.
*4 The setting is available only on the incoming call
screen (full-screen) of the call or video call. The
name may not be hidden on other screens.
*5 Suguden function is disabled overseas
automatically. To use the function overseas, set
Disable Suguden during roaming to OFF in the
Suguden setting.
*6 The Office Link is an extension line service for
corporate customer.
✔INFORMATION
･
Alternatively, you can set call settings from the Home screen,
→[Settings]→[Useful tools]→[Voice call]→[Call
tap
settings].
･
From the Home screen, tap
[Voice call]→[Voice adjust] to adjust listening volume for
making it easy to understand.
･
From the Home screen,
[Voice call]→Mark [Power button ends call] to enable ending
a call by pressing P. Note that you cannot end call by
pressing P in sleep mode.
･
Suguden cannot be used in the following cases.
- When using speakerphone
- When using earphones or headphones or using a Bluetooth
device that supports calling
- While making a call or switching calls when already taking
a call
- While lying down
- While running or going up and down stairs
→[Settings]→[Useful tools]→
→[Settings]→[Useful tools]→
- When covering up the display with a book-type smartphone
case etc.
･
If [Suguden setting] is ON, and the terminal is placed within
a bag or pocket while on the incoming call screen, movement
that registers as an operating motion may cause the call to be
answered or disconnected.
･
The proximity sensor does not respond well to black objects.
(When answering a call) If hair is blocking the earpiece as you
bring the phone to your ear, the proximity sensor may have
trouble working and cause the call to not pick up. In this case,
place the earpiece directly against your ear.
(When disconnecting/rejecting a call) Turning the terminal
over on a black desk, etc. may cause the operation to fail
(cannot disconnect/reject). In this case, instead of placing the
terminal directly on the surface, raise the terminal 1 cm from
the desk, etc. as you flip it over to operate (disconnect/reject).
･
The Suguden (answer) function uses the proximity sensor as
one of the motion determinations. If you use the function with
the proximity sensor (→P29) soiled, you cannot answer
properly, and loud sound may emit near your ear, resulting in
a hearing loss. Clean the sensor regularly.
･
If a motion is performed when [Disconnect] for the Suguden
setting is set to ON, disconnection is activated in the
following cases, and the call is disconnected.
- While the other party is holding
- While Phone memo is active (playing back a greeting/
recording a message)
･
The "Hide the name when receiving" function displays the
caller's name when receiving a call and Phone memo is
active.
75
Calling