Setting Character Entry - NTT docomo F-05J arrows Be Instruction Manual

Example: Entering "ぱ"
･
In the alphanumeric input mode, you can switch between
uppercase and lowercase characters by sliding downwards
without releasing your finger from the screen.
■ 2-touch input
Tap a key assigned a character you want to enter first, then tap
a desired character.
◆ Switching input method
You can also switch to another input method such as the
Google keyboard to enter characters.
･
The Google keyboard does not support the Japanese input
mode.
･
When you switch to "NX!input Chinese" or "NX!input
Korean", you can enter characters only with handwritten
input.
1
From the Home screen,
[Languages & input]
2
[Current Keyboard]→Select an input method
･
The keyboards displayed in the list of "Current
Keyboard" can be set in [Manage keyboards] in "Setting
character entry" (→P44).
→[Settings]→
✔INFORMATION
･
To return to the ATOK Japanese keypad, select [Japanese
Super ATOK ULTIAS].
･
To switch the input mode during entering characters, touch
and hold of the navigation bar (→P49) to select the input
mode.

◆ Setting character entry

Set by character entries.
1
From the Home screen,
[Languages & input]
2
[Virtual keyboard]
The list of the virtual keyboard is displayed.
3
[Google Keyboard]/[Google voice typing]/
[Moji-Henshu]/[Super ATOK ULTIAS]/
[NX!input Chinese]/[NX!input Korean]
･
Tap [Manage keyboards] to set the keyboard displayed
in the list screen of "Current Keyboard" or "Virtual
keyboard".
4
Set required items
･
Available items vary depending on input method.
44
→[Settings]→
Before using the terminal