NTT docomo F-05J arrows Be Instruction Manual page 101

◆ Activating 1Seg
1
From the Home screen, [1Seg]
The 1Seg viewing screen is displayed.
･
When you activate the software for the first time, create
a channel list corresponding to the watching area.→
P102
Ending 1Seg : (Back)
✔INFORMATION
･
The minimum battery power to start or continue operating is
6% (while charging, you can activate or continue operating
regardless of the battery level).
･
It may take a time to acquire image data or broadcasted data
when you activate 1Seg or change channels due to
characteristic of digital broadcasting.
･
Depending on the signal strength, video or audio may be
interrupted or stopped.
･
When the terminal returns to the Home screen or goes into
the sleep mode while receiving 1Seg program, the sound of
1Seg keeps coming out. To end Background play of the 1Seg,
return to the 1Seg watching screen and tap
･
Video can be played back using the video correction engine
by marking [Video correction] when watching in 1Seg.→P133
･
Since 1Seg content is prohibited from copying, screenshot or
Capture & Draw/Highlight & Copy is not available.
❖
1Seg watching screen
a Operation area
･
The screen rotation and menu icon are displayed.
b TV watching area
･
Flick left or right to switch channels.
c Subtitle/Data broadcast area
･
Display the subtitle/broadcast data. To operate data
broadcasting, touch the screen to operate or tap control
(Back).
icons displayed below the data broadcast area.
d Channel information area
Channel name, signal reception, and program name are
displayed.
e Navigation bar
f Controller
/
channel search)
: Pop-up the list of channels
99
a
b
c
d
e
1Seg watching screen
: Switch the channel (Touch and hold to perform a
f
Applications