NTT docomo F-05J arrows Be Instruction Manual page 97

･
Depending on Osaifu-Keitai compatible application or the
setting condition, use of Osaifu-Keitai by holding over an IC
card may not be available when the screen is locked, the
screen backlight is off, or the terminal is turned off.
･
For non-subscriber to sp-mode, a part of Osaifu-Keitai service
may not be available.
･
When the terminal is turned on or restarted, unlock the
screen lock and then hold the terminal over an IC reader to
use the Osaifu-Keitai service.
◆ Using "かざしてリンク対応サービス
(Kazashite-Link compatible service)"
1
From the Home screen,
[Wireless & networks]→[NFC/Osaifu-Keitai
Settings]
･
When the password setting screen for NFC/Osaifu-
Keitai lock appears, follow the onscreen instructions to
set password.
･
If [Lock NFC/Osaifu-Keitai] is marked, unmark the
checkbox.
･
Alternatively, from the Home screen,
Keitai]→ / to display the "NFC/Osaifu-Keitai
Settings" screen.
2
Mark [Reader/Writer, P2P]
3
Hold mark over a device equipped an NFC
module, a smart poster, etc.
･
In addition, you can exchange information between
terminals using Android Beam.→P167
→[Settings]→
→[Osaifu-
◆ Tap & pay
By holding the terminal over the IC card reader to select an
available service.
･
For using Tap & pay, on the Tap & pay screen, [MENU]→Tap
[How it works] and read the displayed explanation.
1
From the Home screen,
[Wireless & networks]
2
[NFC/Osaifu-Keitai Settings]→[Tap & pay]
Tap & pay screen appears.
◆ Notes when holding over the other
device
Pay attention to the following when holding the terminal over
a card reader, NFC module equipped device, etc.
mark
･
Bring mark close to the device slowly, do not hit it
strongly.
95
→[Settings]→
IC card reader
Applications