NTT docomo F-05J arrows Be Instruction Manual page 128

❖
About applications compatible with
Multi-connection
The application displayed by tapping [Select application] is the
Multi-connection target.
✔INFORMATION
･
When the running application is selected in [Select
application], enabling the setting may take time.
To enable the setting immediately, end the running
application and restart the terminal.
･
Some functions may be restricted when using Wi-Fi for the
site that distinguished network connection (dメニュー
(dmenu)→Items in "My docomo (お客様サポート)" (My
docomo (customer support)) etc.). In that case, turn off Wi-Fi
before use. On the website that does not support multi-
connection, you cannot see some part of a streaming movie.
In that case, turn off Multi-connection before use.
･
Multi-connection cannot be used in the following cases.
- In Airplane mode
- During international roaming
- Tethering in use
- VPN in connection
- Wi-Fi Direct/Miracast in connection
･
If the Wi-Fi network registered in [Frequently used hotspot]
behaves erratically, some applications that usually restrict
communications to Wi-Fi may temporarily switch over to
packet communications (LTE/3G).
･
When Multi-connection is set to OFF, high-speed download/
high-speed streaming also turns OFF.
･
If data amount exceeds the limit of subscribed budget plan
and transmission speed is limited, multi-connection does not
work.
◆ Wi-Fi Auto ON/OFF
Turn Wi-Fi to ON/OFF automatically using information from
the mobile network base station.
Set whether to turn on the Wi-Fi function when the Wi-Fi
network which has been connected is automatically detected,
or turn off the Wi-Fi function when the Wi-Fi network which
has not ever been connected is automatically detected.
1
From the Home screen,
[Wireless & networks]→[Wi-Fi]
2
[MENU]→[Advanced]→Mark/Unmark [Wi-Fi
Auto ON/OFF]
✔INFORMATION
･
The area where this function is set to ON and the terminal is
connected consecutively to the same access point for 2
minutes or more is detected as the connected Wi-Fi network.
･
This function does not work if Airplane mode or Wi-Fi
tethering is ON.
･
The terminal may not connect automatically with this
function if Wi-Fi information in the area is changed etc. In
such case, connect manually.
126
→[Settings]→
Settings