NTT docomo F-05J arrows Be Instruction Manual page 168

Table of Contents

Advertisement

<Example> Receiving files from a Bluetooth device
1
Send files from a Bluetooth device
2
After the file arrival is notified, open the
Notification panel→[Bluetooth Share:
Incoming file]→[ACCEPT]
To check the received files, from the Home screen,
[Settings]→[Wireless & networks]→[Bluetooth]→
[MENU]→[Show received files].
◆ Canceling connection with a Bluetooth
device
When a Bluetooth device such as an earphone microphone or
keyboard is connected, cancel it by the following operation.
1
From the Home screen,
[Wireless & networks]→[Bluetooth]
2
Tap the connected Bluetooth device→[OK]
◆ Unpairing from Bluetooth device
1
From the Home screen,
[Wireless & networks]→[Bluetooth]
2
Tap the button at the upper right of the screen
to turn [Bluetooth] to ON→
device→[FORGET]
→[Settings]→
→[Settings]→
of the Bluetooth
166
◆ Renaming a Bluetooth device
1
From the Home screen,
[Wireless & networks]→[Bluetooth]
2
Tap the button at the upper right of the screen
to turn [Bluetooth] to ON→
device→Enter a device name→[OK]
◆ Bluetooth Low Energy setting
Set notification for Bluetooth Low Energy device.
1
From the Home screen,
[Wireless & networks]→[Bluetooth]→[MENU]
→[Bluetooth Low Energy]
2
Set required items
Alert Notification : Set whether to notify to compatible
devices of incoming calls, new email, etc.
Alert Notification Detail Setting : When Alert Notification
is ON, select items to notify (incoming call, docomo mail,
Email, Gmail, SMS, alarm, calendar).
Find Me Ringtone : Set whether to emit ringtone when
receiving notification from compatible devices.
Find Me Ringtone Settings : When Find Me Ringtone is
ON, select from the notification ringtone list.
Proximity : Set notification level for compatible devices
when connection is canceled.
Connecting compatible device again is needed for
reflecting this setting.
→[Settings]→
of the Bluetooth
→[Settings]→
Data communication

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F-05J arrows Be and is the answer not in the manual?

Questions and answers

Banda Eddy
January 28, 2025

I was repairing the phone and refused to power on after, even though you put in charger, doesn't display,and has no damages

User image 6798cf87d2ea6
1 comments:
Mr. Anderson
February 10, 2025

If the NTT docomo F-05J arrows Be does not power on after repair, even when connected to a charger, it may be because the battery is completely empty. In this case, the device may not turn on immediately after pressing the power button. The recommended solution is to charge the device while keeping it turned off and then try turning it on after a while. If the issue persists, further troubleshooting or contacting a DOCOMO-specified repair office may be necessary.

This answer is automatically generated

Table of Contents

Save PDF