Manner Mode - NTT docomo F-05J arrows Be Instruction Manual

✔INFORMATION
･
When [Ring volume] is set to 0, the vibration turns to ON. To
set the vibration OFF, set it to the Manner mode (Silent) (→
P137).

◆ Manner mode

Set/Cancel Manner mode.
･
You can change the Manner mode type.→P137
1
From the Home screen,
[Display/Sound/Apps]→[Sound]→[Manner
mode]
2
Set [Manner mode] to ON
･
When Manner mode is set, the status icon appears on
the status bar. The icon varies by Manner mode type.
For each icon, see "Icons on the status bar".→P51
✔INFORMATION
･
You can also enable/disable Manner mode in the followings.
- Press the volume down key for 1 second or more
- Open the Notification panel→In the Panel switch, [Manner]
- Press and hold P until the phone options menu appears→
[Manner mode]
* Depending on the manner mode you set, tap [Manner
mode (Silent)]/[Manner mode (Alarm)]/[Original manner].
･
Regardless of Manner mode settings, shutter sound,
shooting start/end sound, auto focus lock sound, count down
sound for self timer, screen shot sound while the camera is
activated, capturing sound for Capture & Draw/Highlight &
Copy, and Find Me Ringtone for Bluetooth Low Energy
Settings are emitted.
→[Settings]→
137
❖
Changing Manner mode type
1
From the Home screen,
[Display/Sound/Apps]→[Sound]→[Manner
mode]→[Select manner mode]
2
Selecting an item
Manner mode : All sounds do not sound from the terminal
speaker. And the vibration turns to ON.
Manner mode (Silent) : In addition to mute sounds, turn
off the vibration.
Manner mode (Alarm) : Same operation as Manner mode
except alarm volume and vibration go along to the alarm
settings.
Original manner : Set sound volume for each sound type
and vibration for incoming calls.
･
Note that when the volume of original manner is set
[Silent], increasing volume by pressing the volume key
up etc. changes the volume settings of original manner.
❖
Original manner
1
From the Home screen,
[Display/Sound/Apps]→[Sound]→[Manner
mode]→[Original manner settings]
2
[Call ringtone volume]/[Media volume]/[Alarm
volume]/[Notification volume]
3
Slide the slider to adjust sound volume→[OK]
4
Mark/Unmark [Vibration]
→[Settings]→
→[Settings]→
Settings