Brother ADS-2600W Service Manual page 92

(8) Remove the taptite bind B M3x10 screw to remove the top cover sensor holder from the panel
ASSY.
(9) Release the two hooks to remove the top cover sensor from the top cover sensor holder.
(10) Lift the top cover actuator and remove it from the boss on the panel ASSY along with the top
cover actuator spring.
(11) Remove the top cover actuator spring from the top cover actuator.
Top cover
actuator spring
Top cover actuator
Boss
Top cover
actuator spring
Boss
HARNESS ROUTING: Refer to
Assembling Note:
• Attach the top cover actuator spring on the position described in the illustration above.
Panel ASSY
Top cover sensor
Top cover actuator
Panel ASSY
Fig. 3-22
"2. Panel PCB ASSY".
3-26
Taptite bind B M3x10
Top cover sensor holder
Hooks
Confidential