Usb Host Pcb Assy - Brother ADS-2600W Service Manual

9.8

USB host PCB ASSY

(1) Remove the taptite bind B M3x10 screw to remove the earth harness (BK).
(2) Release the USB host PCB harness, the front cover sensor harness, the double feeding
sensor harness (Receive), and the earth harness (BK) from the securing fixtures.
(3) Remove the two taptite bind B M4x12 screws. Lift the USB earth plate to remove the USB
host PCB ASSY from the machine.
Note:
• Be careful not to deform the USB earth plate.
Taptite bind B M4x12
USB host PCB harness
USB earth plate
HARNESS ROUTING: Refer to

USB host PCB ASSY

Fig. 3-14
"1. Main PCB ASSY" and
3-19
Taptite bind B M3x10
Earth harness (BK)
Double feeding sensor
harness (Receive)
Front cover sensor harness
"3. Frame R".
Confidential