Brother ADS-2600W Service Manual page 14

Make sure that no part of the machine protrudes from the desk or stand where the
machine is located. In particular, do not leave the output tray open and extended
beyond the edge of a cabinet, table or stand when the machine is located on the edge
of a cabinet, table, stand, etc. As previously cautioned, make sure that the machine is
located on a flat, level, and stable surface free from vibration. Failure to observe these
precautions could cause the machine to fall, causing injury to you or others and
serious damage to the machine.
Important
• DO NOT place your machine next to sources of interference, such as speakers or
the base units of non-Brother cordless telephones. Doing so may interfere with the
operation of the machine's electronic components.
• DO NOT connect your machine to an AC power outlet controlled by wall switches or
automatic timers. Disruption of power can delete information from the machine's
memory, and repeated cycling of the power can damage the machine.
WARNING
ELECTRICAL HAZARDS
Failure to follow the warnings in this section may create the risk of an electrical shock.
In addition, you could create an electrical short, which may create the risk of a fire.
There are high-voltage electrodes inside the machine. Before you access the inside
of the machine, including for routine maintenance such as cleaning, make sure you
have unplugged the power cord from the AC power outlet, as well as unplugged any
Ethernet (RJ-45) (ADS-2500WE only) cables from the machine.
DO NOT push objects of any kind into the machine through slots or openings in the
casing, as they may touch dangerous voltage points or short out parts.
DO NOT continue using the machine if it has been dropped or the cabinet has been
damaged. Instead, unplug the machine from the power outlet and contact Brother
Authorized Service Personnel.
xi
Confidential