Display Software Version (Function Code: 25) - Brother ADS-2600W Service Manual

1.3.7 Display software version (function code: 25)

<Function>
This function is used to check the firmware creation date and check sum information.
<Operating Procedure>
(1) Press the [2], and then the [5] key in the initial state of maintenance mode. The firmware
version is displayed on LCD as "TOTAL:Ver*".
(2) Pressing the [Start] key changes the display as shown in the table below.
(3) When the
LCD
TOTAL:Ver T
NET :Ver1.00
PANEL:U08102319
PNL B:110050615
i0612312359:1234
B0612312359:1234
U0612312359:1234
ROM Check Sum
button is pressed, the machine returns to the ready state.
Main Firm Version information
Network Version information
TouchPanel Main Firmware Version information
Panel Boot Firmware Version information
I-FAX Version information
Boot Firm creation date
Main Firm creation date
Calculate Check Sum of BOOT and MAIN. When the check sum
matches to the one at the end of part ROM area, "OK" is displayed on
the LCD. When the check sum does not match, "NG" is displayed.
5-9
Description
Confidential