Main Motor - Brother ADS-2600W Service Manual

9.19 Main motor

(1) Remove the taptite cup S M3x6 screw to remove the earth harness (YW).
(2) Release the main motor harness from the securing fixtures, and pull it out from the main
motor.
(3) Release the hook to remove the core of the first side CIS flat cable from the lower frame.
(4) Remove the four taptite cup B M3x10 screws to remove the lower frame from the lower
chute ASSY.
Lower frame
Lower chute ASSY
HARNESS ROUTING: Refer to
(5) Remove the screw pan (S/P washer) M3x6DA screw. Turn the main motor in the direction
of the arrow to release it from the hook, and remove it from the lower chute ASSY.
Hook
First side CIS flat cable
"1. Main PCB
Lower chute ASSY
Taptite cup B M3x10
First side

Main motor

CIS flat
harness
cable
Core
Hook
Fig. 3-37
ASSY".
Main motor
Fig. 3-38
3-39
Taptite cup S M3x6
Earth harness (YW)
Main motor
Screw pan
(S/P washer)
M3x6DA
Confidential