Brookfield PFT Powder Flow Tester Operating Instructions Manual page 73

If the PFT will be sent back to you after repair or calibration, it is not necessary to
15)
return the accessory items other than the Vane Lid and Trough, which are already
installed on the instrument. If the PFT is not being sent back to you, package all
necessary items in bubble bags and place in accessory carton (Part Number PFT-
PACK1).
Close and tape up the accessory carton.
16)
Place the accessory carton (PFT-PACK1) on top of the top foam packaging piece.
17)
If you do not have the accessory carton, please contact Brookfield for replacement
parts. If the accessory carton is not used, damage to the instrument may occur.
AMETEK Brookfield Page 73 Manual No. M09-1200-F1016