Table of Contents
Advertisement
•
Select Enabled? and press Yes Key.
The VLAN ID will be tagged on all packets generated by the phone (SIP, RTP, DNS, ARP, etc.). Default:
Disabled.
•
Scroll to select VLAN ID and press Enter Key.
Enter the VLAN ID that you have assigned to the VLAN in which the IP Phones are connected. Valid
range: 0-4094. Default: 1. Press OK Key.
•
Scroll to SIP CoS and press Enter Key.
Enter the CoS (priority) value for all SIP packets. Valid range: 0-7. Default: 3 Press OK Key.
•
Scroll to RTP CoS and press Enter Key.
Enter the CoS (priority) value for all RTP packets. Valid range: 0-7. Default: 6. Press OK Key.
To add VLAN header to all packets entering the PC Port and leaving the LAN port of the phone,
•
Scroll to PC VLAN/CoS and press Select Key.
•
Select Enabled? and press Yes Key.
The VLAN ID will be tagged on all packets generated by the phone (SIP, RTP, DNS, ARP, etc.). Default:
Disabled.
•
Scroll to select VLAN ID and press Enter Key.
Enter the VLAN ID that you have assigned to the VLAN in which the IP Phones are connected. Valid
range: 0-4094. Default: 1. Press OK Key.
•
Scroll to CoS and press Enter Key.
Enter the Layer 2 CoS (priority) value. Valid range: 0-7. Default: 0 Press OK Key.
PCAP
To capture packets sent and received from and by the phone for monitoring and troubleshooting, you can enable
PCAP on the phone. The phone captures up to 1 MB of packets.
•
Scroll to PCAP.
•
To start PCAP, when the cursor is placed on PCAP, press Start Key.
•
To stop PCAP, press the Stop Key.
Matrix EON510/VP510 User Guide
41
Hide quick links:
Advertisement
Table of Contents
