Table of Contents
Advertisement
Refer to the diagram below to connect the Handset, Headset and the cable.
Connect the Handset
•
Plug the long straightened end of the Spring Cord into the handset jack at the bottom of the phone, marked
with the handset symbol
•
Plug the other (short straight) end of the Spring Cord into the jack at the bottom of the handset.
Connect the Headset (not supplied by Matrix)
•
To use a Headset (not supplied with the phone), plug any standard stereo headset with 3.5mm single
connector into the headset audio jack at the bottom of the phone, marked with the symbol
OR
You may also plug in a headset with an RJ9 connector into the headset port at the bottom of the phone,
marked with the symbol
Connect the Cable
•
Plug one end of the Line Cord supplied with the phone into the RJ11 connector at the bottom of the phone,
marked with the symbol
jack originates from the DKP card through the MDF.
Matrix EON510/VP510 User Guide
.
.
and the other end into the wall jack/DKP port. The cable in the wall
.
29
Hide quick links:
Advertisement
Table of Contents
