Matrix EON510 User Manual page 16

So you can use any stereo headset of standard make with a 3.5 mm single connector or a headset with an RJ9
connector.
To use the Headset, a Headset Key is assigned on the phone. The Headset Key on the phone is equipped with a
single color LED which glows Blue when pressed to indicate that the Headset mode is turned on and is turned off,
when you press it again to indicate that you have exit the headset mode.
LEDs of CA Keys
The LEDs of DSS Keys that are designated as Call Appearance (CA) Keys will function as follows:
LED
Color
Continuously ON
Blue When you are in speech with
a Station (internal call)
Red The key assigned to the
Station that is now busy with
another Station/Trunk.
Violet When you are in speech with
Trunk (external call)
• Status of Features: The LED of a DSS key is activated when the feature assigned to this key is used.
Not all features require LED indication. Hence the LED on a DSS Key is activated only if the feature
assigned to that key requires LED. Thus, the LEDs of the DSS keys function only if the LED is relevant for
the feature/ function assigned to the keys, and otherwise remain inactive for example, Raid, Interrupt
Request, Barge-In, Last Caller Recall.
Phone Menu
You can access the following PBX and phone features from the Menu of the phone:
Menu option
Call Logs
Contacts
Call Forward
Dynamic Lock
User Status
Keypad Lock
Do Not Disturb
Call Cost Display
Hotline
Alarm
10
Slow Blink
When you have put a Station
on hold (internal call)
The key assigned to the
Station which has put another
Station/Trunk on hold.
When you have put a Trunk
on hold (external call)
Description
To view call history of internal and external Missed, Answered and Dialed calls.
You can also edit numbers in the call logs and store them in the Personal Directory.
To add, edit, delete names and numbers of contacts in the Global Directory Part 1.
To set and cancel Call Forward-Unconditional, Call Forward-Busy, Call Forward No
Reply, Forward On Busy/No Reply and Follow Me.
To change the Toll Control level of the phone.
To set User Present or User Absent and Presence Status.
To lock the keypad of the phone.
To set/cancel Do Not Disturb on the phone, that is, block incoming internal and external
calls.
To view the cost of calls made from the phone.
To set/cancel Hotline and Delayed Hotline.
To set/cancel Personalized and Automated Alarms.
LED Mode
Fast Blink
When any Station is calling
(internal call)
The key assigned to the
Station/Trunk that is called or
being called by another.
When any Trunk is calling
(external call)
Matrix EON510/VP510 User Guide