Water Pump Reassembly - Suzuki RM250 Owner's Service Manual

• Remove the gasket and dowel pins.
• Inspect the impeller for damage .
• Remove the clutch cover .
( a
7·2)
• Remove the circlip with snap ring pliers.
• Remove the water pump driven gear and water pump
shaft.
• Inspect the water pump driven gear and shaft for damage.
• Inspect the bearing for smooth inner race movement.
• Inspect the oil seal for damage.
• Remove the oil seal with the special tool.
09913-50121 Oil seal remover
• Remove the bearing.
Reassembly
• Fit the bearing and circlip. Apply transmission oi l to the
bea ring.
• Apply thread lock" 1303" to the outer surface of the
oil seal. Fit the oil seal.
• Apply grease to the oil seal lip.
• Insert the water pump shaft. Fit the water pump driven
gear and circlip.
• Reassemble the clutch cover. (
rJ
7-5)
• Reassemble the water pump impeller.
• Fit the dowel pins and a new gasket.
• Fill the radiator with coolant.
!
r J
11 -2)
COOLING SYSTEM 11 ·3
Grease
Thread Lock " 1303"