Suzuki RM250 Owner's Service Manual page 128

16·6 REAR SUSPENSION
A
WARNING
Releasing high pressure gas from the rear shock absorb-
er unit can be hazardous .
Never perform any servicing until the nitrogen gas pres-
sure has been released from the
feaf
cushion unit. When
releasing the gas pressure , place a rag over the gas valve
and the end of the screwdriver etc. to press the valve.
Do not use your finger to depress the gas valve, and direct
valve away from your face and body .
• Remove the compression adjuster ass'y.
• Place a drain pan under the rear cushion unit. Move the
rod and drain the oil.
• Push the valve core again to make the bladder in the reser-
voir at the normal condition .
• Move the rod and pour the oil as shown .
NOTE: Be sure to extend the rod after filling the oil.
• Tilt the rear cushion unit as shown and pour the fresh
rear suspension oil into the reservoir tank.
Oillype : SUZUKI REAR SUSPENSION OIL SS-25 or eQuiva -
lent rear suspension oil.
Oil capacity:
340
ml
(11.5/12 .0
US/Imp oz)
• Reassembly the compression adjuster ass ' y.
Tightening torque:
18
N 'm
'1 .8
kg-m.
14.5
Ib -ft)
10 mm