Rebound Damping Force Adjustment; Compression Damping Force Adjustment; Air Pressure Adjustment - Suzuki RM250 Owner's Service Manual

FRONT FORK
The front fork compression and rebound damping force. oil
level is adjustable for rider's preference, riders weight and
course condition.
NOTE:
• Break-in new front forks before attempting adjustment.
(= 1-4)
• 8e sure to adjust both right and left front forks equally.
Rebound Damping Force Adjustment
• Turn the adjuster screw clockwise until it stops that is
fu ll hard.
NOTE: To set the adjuster, you must gently turn the ad-
juster surew clockwise until
it
stops, then back
i1
out the
recommended number of turns. Do not force the adjuster
screw past the stopped position or you may damage the ad-
juster.
• Turn the adjuster screw counterclockwise and the 15th
position is the standard position.
Standard setting: 15th cli ck
Compression Damping Force Adj u stm ent
• Turn the adjuster screw clockwise until it stops that is
full hard.
NOTE: To set the adjuster, you must gently turn the ad-
juster screw clockwise until it stops, then back it out the
recommended number of turns. Do not force the adjuster
screw post the stopped position or you may damage the ad-
juster.
• Turn the adjuster screw counte rclockwise and the 10th
position is the standard position.
Standard setting : 10th click
Air Pressure Adjustment
• Place a block under the chassis t ube to li ft the front w heel
off the ground.
• Remove the air bleed screw and equalize the air pressure
in the front forks to atmosphe ric pressure .
• Re-fit the air bleed screw.
MACHINE TUNING 4·8
S----"H
J