Suzuki RM250 Owner's Service Manual page 49

• Remove the clutch release arm.
• Remove the engine mounting bolts and plates.
• Remove the swing arm pivot shaft.
NOTE: The swing arm will come off when the swing arm
pivot shaft is completely removed,
• Remove the engine from the frame.
ENGINE MOUNTING
• Mount the engine on the frame .
• Tighten the engine mounting nuts.
Tightening torque
N.m
kg-m Ib·ft
CD@
43 4.3
31.0
@
35 3.5 25.5
@
65
6.5
47 .0
NOTE: Replace the self-locking nuts with new ones.
Reassemble the parts in the reverse order of removaL
NOTE: Route the cables and lead wires correctly.
l a 19·1)
After mounting the engine , inspect the following items.
• Transmission oil level!
c:r
2-5)
• Coolant level
!
c:r
2-5)
• Throttle cable play (
c:r
2- 7)
• Clutch lever play (
c:r
2-7)
• Drive chain slack (
c:r
2-8)
ENGINE DISMOUNTING AND MOUNTING 5·2
,
,
.