Suzuki RM250 Owner's Service Manual page 111

• Separate the fork cap bolt
@
from the outer tube
®
and
slowly slida down the outer tube.
• Place a drain pan under the front fork and drain the fork
oil.
• Clamp the axle holder for right fork or caliper bracket for
leh fork in a vise. Protect the axle holder or caliper bracket
with a rag when using a vise.
• Move the inner tube and inspect it for smooth movement .
.. CAUTION
Clamping the axle holder too tight can damage it which
will affect riding stability.
Do not clamp the axle holder too tight .
• Loosen the center bolt
®
completely from the bottom
of fork with a 21 mm socket wrench .
• Press the fork cap inward until the center bolt @ and lock
nut
®
are exposed on the opposite end.
• Place the stopper plate around the inner rod stem w hile
pressing on the fork cap.
09940·94920 Stopper plate
fRONT fORK AND STEERING 15·3
Spacer
5
1\
--