Swing Arm Inspection - Suzuki RM250 Owner's Service Manual

16·8 REAR SUSPENSION
• Remove the chain guide.
• Remove the rear cushion rod bolt.
• Remove the swing arm pivot bolt.
• Remove the swing arm.
• Remove the covers and bushings .
Swing Arm Inspection
• Measure the pivot shaft runout with a dial gauge and V-
blocks .
Service limit: 0.3 mm (O.01 in)
• Inspect the swing arm for cracks and damage.
• Inspect the bearings, bushings and oil sea ls for damage.
• Insert the bushings into the bearings and inspect them
for play and smooth movement.
Bearing Replacement
• Remove the bearings and oil seals with the special tools .
09923-74510
09930-30102
Bearing pul/er
Rotor remover slide shaft
C=='IIOO
,-