Device Properties - Smartek UCC User Manual

User Manual - twentynine

6.5.2.3 Device Properties

The Device Properties dialog contains all information and settings of the chosen camera, provided
by the camera's GenICam file.
General information about the camera selected from the list of discovered devices is displayed in the tab
Device Info . Among others it contains the device name, firmware and hardware versions as well as the
current IP configuration. It is accessible already before a connection has been established.
The Parameters tab shown in Figure 67 shows the parameters of the camera and is only accessible while
a connection to the camera is established. It displays a tree of features extracted from the GenICam
description file of the camera and enables the adjustment of camera settings according to the needs of
the application.
Figure 67: Device Properties - Parameters tab
According to the current settings of the camera, the acquisition can be started by pressing the Start
button shown in Figure 68. To receive a continuous image stream from the camera, without having any
external trigger signals applied, it must be ensured that the AcquisitionMode is set to Continuous and the
TriggerMode is set to Off .
90
SMARTEK Vision | User Manual - twentynine | Doc. v1.0.2