Smartek UCC User Manual page 146

Sharpening in the CameraSuite SDK
In the CameraSuite SDK the ImageProcAPI provides the programming interface for configuring and
executing the sharpening algorithm. The bit depths and image types supported are shown in Table 62.
For a detailed description on how to use this feature please refer to the CameraSuite API Help located in
the doc folder of the CameraSuite SDK installation directory.
Supported image input
Sharpening in the CameraSuiteClient
In the CameraSuiteClient the Image Sharpen options can be accessed in the Image Processing Properties
panel under Other , shown in Figure 116. If not visible, the panel can be enabled by the menu bar entry
Control ⇒ Image Processing Properties .
Enable: Activate / deactivate the image sharpening feature
Reset: Sets the sharpen factor to the default value
Monochrome
Raw Bayer
Color RGB
Table 62: Sharpening - supported bit depth and image type
Figure 116: Sharpening in the CameraSuiteClient
Supported bit depth
8 bit per channel
140
User Manual - twentynine
16 bit per channel
SMARTEK Vision | User Manual - twentynine | Doc. v1.0.2