Luminance Look-Up-Table - Smartek UCC User Manual

5.2.6 Luminance Look-up-Table

The twentynine camera series equipped with monochrome sensors support 12bit look-up table. The theory
and applications of look-up table will be introduced in chapter 8.2.1.
Figure 37 shows the on camera look-up table feature located in the LUT-CAM tab within the Image
Processing Properties panel. If not visible, the Image Processing Properties panel can be activated by
the menu bar entry Control ⇒ Image Processing Properties .
Reset: Reset look-up table to default values
Inverse: Generate a predefined look-up table which inverts the image
Load Values: Load an user-defined XML file with look-up table parameters into the client
Save Values: Save the user-defined look-up table to a file
A common way to set all LUT values at a time in the client is to describe the LUT in a XML file and load it
to the camera. To accomplish this, use the Load Values feature in the CameraSuiteClient (see Figure 37).
Please refer to the Look-up table section in chapter 8.2.1 for more information about how a XML file is built.
By default the on camera look-up table is disabled. This feature is not visible until the user changes the
Visibilty option in Device Properties panel to Expert or Guru (see Figure 38 and Figure 39).
In order to modify individual LUT value it is neccessary that the Visibilty option is set to Guru . Modifying
each value in the LUT means first select the required index and second set the desired value (see Figure
39).
Figure 37: LUT-CAM feature in CameraSuiteClient
53
User Manual - twentynine
SMARTEK Vision | User Manual - twentynine | Doc. v1.0.2