3.4 Status LED
All cameras have a bi-color status LED on the back of their housing. During boot-up, it will steadly output
yellow light for several seconds. As soon as the camera is operational, it switches to steady green light.
Errors are indicated by a specific number of red pulses on the status LED, described in Table 16.
Status LED
Steady Green
Steady Yellow
Blinking Red
Description
Camera is operational (status OK)
Camera is powered on and booting up
Camera is in error state - number of pulses indicate the detected error:
1 pulse - no user firmware present
2 pulses - user firmware watchdog timeout
3 pulses - user firmware data CRC error
4 pulses - error configuring FPGA (NSTATUS asserted)
Table 16: Status LED
34
User Manual - twentynine
SMARTEK Vision | User Manual - twentynine | Doc. v1.0.2