Region Of Interest (Roi) - Smartek UCC User Manual

5.3 Region of Interest (ROI)

The Region of Interest feature allows portion of the sensor array to be read out and transmitted over
transport layer. Information from pixels outside the ROI are discarded. Decreasing the ROI generally leads
to increasing the maximum allowed frame rate.
Region of Interest is defined by horizontal ( OffsetX ) and vertical ( OffsetY ) offset from image origin (top-left
corner) and region size in horizontal ( Width ) and vertical ( Height ) direction.
Parameter Type
Width Integer
Integer
Height
Integer
OffsetX
OffsetY Integer
While the image acquisition process on the camera is active, only changes to the parameters that determine
the position of the ROI are allowed ( OffsetX, OffsetY ). Changes to parameters that define the ROI size
( Width, Height ) are not allowed. Changes to parameters while the image acquisition process is active is
also called "on-the-fly" changes.
Figure 40: Region of Interest
Horizontal size of the ROI image (in pixels)
Vertical size of the ROI image (in pixels)
Horizontal offset from the origin to the ROI (in pixels)
Vertical offset from the origin to the ROI (in pixels)
Table 26: Region of Interest parameters
55
User Manual - twentynine
Description
SMARTEK Vision | User Manual - twentynine | Doc. v1.0.2