Network Interface Optimization; Jumbo Frames - Network Interface Cards - Smartek UCC User Manual

7.1.3 Network Interface Optimization

To reach the optimal performance with the twentynine cameras, the right choice of hardware is crucial, as
well as its configuration. All following descriptions of driver settings are based on the Intel
interface on Microsoft Windows, the availability of each feature and its limits can differ between hardware
vendors and operating systems.

7.1.3.1 Jumbo Frames - Network Interface Cards

For Network Interface Cards (NIC) it is usually necessary to enable the Jumbo Frame / Packet feature
manually within the device driver.
On Microsoft Windows operating systems this can be accessed the following way:
1. Execute "ncpa.cpl", i.e. via the command box of the Windows Startmenu or after pressing
your keyboard
2. Right-click the target network interface card and choose Properties .
3. Press the Configure button below the name of the physical network interface, shown in Figure 79.
4. The settings of the driver can be accessed by choosing the Advanced tab of the opened window. As
shown in Figure 80, raise the value of the Jumbo Packet property to its maximum value.
Figure 79: Access to network interface card driver settings
100
User Manual - twentynine
network driver
SMARTEK Vision | User Manual - twentynine | Doc. v1.0.2
+ R on