C-Mount; Supported Third-Party Software - Smartek UCC User Manual

1.2.4 C-Mount

A C-Mount is a type of lens mount commonly found on 16mm movie cameras, closed-circuit television
cameras (CCTV), trinocular microscope photo tubes and CCD/CMOS digital cameras. C-Mount lenses
provide a male thread which mates with a female thread on the camera. The thread is nominally 25.4mm
[1"] in diameter, with 32 threads per inch, designated as "1-32 UN 2A" in the ANSI B1.1 standard for unified
screw threads. The flange focal distance is 17.526mm [0.69"] and thread length 3.8mm [0.15"].

1.3 Supported Third-Party Software

The twentynine cameras have been verified to be applicable with the third-party software shown below in
Table 2.
Software
Cognex Vision Pro
Matrox Imaging Library
MVTec Halcon
National Instruments
LabView
Scorpion Vision
Native (GigEVision interface)
Native (GigEVision interface)
Native (GigEVision interface)
National Instruments IMAQdx (Plugin)
Plugin provided by SMARTEK Vision
Table 2: Third-Party Software
7
User Manual - twentynine
Requirements
SMARTEK Vision | User Manual - twentynine | Doc. v1.0.2