Log Dialog - Smartek UCC User Manual

Setting Chunk Data values
UserIntValue can be set up through properties window shown in Figure 74. The value is included in Data
Payload if UserIntValue chunk is enabled.
Figure 75 shows CounterAndTimerControl.
CounterAndTimerControl: Group for counter and timer controls
CounterSelector: Select which counter will be active
CounterEventSource: Select source for counter
CounterValue: Set / read counter value

6.5.5 Log Dialog

The Log dialog contains logging information from SDK and cameras, shown in Figure 76.
Figure 74: Chunk Data Values
Figure 75: Chunk Data Values
Figure 76: Log dialog with API logging
96
User Manual - twentynine
SMARTEK Vision | User Manual - twentynine | Doc. v1.0.2