Power And I/O Interface - Smartek UCC User Manual

3.3 Power and I/O Interface

Beside the Ethernet and USB3.0 interface for communication and data transmission, all cameras are
equipped with an I/O-interface and power input . Via this interface the cameras provide access to one
opto-isolated digital input and one opto-isolated output. GCC cameras have additionally a dedicated power
supply input.
Model
GCC (standard housing)
UCC (standard housing)
6-pin Circular Hirose Connector
The housed twentynine standard cameras are equipped with a 6-pin circular Hirose receptacle to
provide access to the power interface as well as the input and output lines. Figure 20 shows the pin and
connector orientation on the back of the camera housing, Table 13 shows the corresponding pin assignment.
Figure 20: 6-pin circular Hirose receptacle - Pin and connector orientation
GCC Signals
Pin no.
DC power supply
1
Opto-isolated In
2
Direct coupled I/O (optional)
3
Opto-isolated Out
4
GND for opto-isolated I/O
5
Power GND
6
The 6-pin connector on the camera is a Hirose receptacle and can be used with a
Note
HR10-7P-6S or equivalent.
6-pin Circular Hirose
6-pin Circular Hirose
Table 12: Power and I/O-interface connector type per model
4 3
5 2
6 1
Table 13: 6-pin circular Hirose receptacle - Pin assignment
Connector Type
UCC Signals
Direct coupled I/O (optional)
Opto-isolated In
Direct coupled I/O (optional)
Opto-isolated Out
GND for opto-isolated I/O
GND for direct coupled I/O (optional)
30
User Manual - twentynine
Receptable
HR10-7P-6S
HR10-7P-6S
SMARTEK Vision | User Manual - twentynine | Doc. v1.0.2