Perform Setup; Activate The Setup Menu - Image Access WideTEK 36DS Setup Instructions

Perform Setup

Perform Setup

Activate the Setup Menu

To activate the setup menu proceed as follows:
➢ During the start sequence tap exact three times onto the touchscreen
(1).
✓ At the end of the start sequence the touchscreen shows the "Self
Test 1" screen.
Menu and Buttons
SELF TEST 1
IP ADDRESS
▲
WHITE BALANCE
LAMP ON/OFF
▼
EXIT SELFTEST
> MORE
24
Name
Menu name
Button for network configuration
Button to drive the document forward in the
scanner
Button for white balance
Button for lamp test
Button to drive the document backward in the
scanner (rewind)
Button to leave the Self Test mode to the start
screen
Button to switch to "Self Test 2" menu